A dehumidifier running in a dry Houston room to prevent mold after water damage.
Water-damage mold, handled inside the Texas rules

Mold Remediation Houston After Water Damage

Mold remediation Houston homeowners need after a leak or flood starts with the water damage itself — find the moisture, dry the structure, then deal with the mold. Restoration Enterprise handles mold that follows water damage, and we work inside the Texas rules: mold remediation of 25 contiguous square feet or more requires a TDLR-licensed remediator, and the company that assesses the mold cannot remediate the same job. Call (346) 980-0009 — open 24 hours.

Prepared local crewClear options firstFinal testing and walkthrough

Focused arrival windows

Useful updates and clear arrival timing.

Clear scope before work

Review the approach and written scope before deciding.

Prepared, clean crews

Equipped vehicles and respectful cleanup.

Local accountability

Neighbors serving neighbors with follow-through.

What is included

What Our Mold Remediation Includes

Mold follows water. Every step below is standard on a mold job that follows water damage in Houston. Assessment is done by a separate licensed assessor — we do not offer mold inspection or testing as a service.

01

Water Source and Drying First

Mold is dealt with after the water source is stopped and the structure is drying. Drying the structure is part of the remediation, not an afterthought.

02

Containment

The affected area is sealed off with plastic sheeting and barriers, and negative air is used so dust does not travel to clean rooms while we work.

03

Removal of Affected Material

Drywall, insulation and other porous material with mold growth is removed, not painted over or covered up.

04

Cleaning and Sanitizing

Exposed framing and hard surfaces are cleaned and sanitized after the affected material is out.

05

Drying Verification

Moisture readings are taken after cleaning to confirm the structure is dry before any rebuild is scoped.

06

Assessment by a Separate Licensed Assessor

Mold assessment — inspection and testing — is a separate licensed activity in Texas. A separate licensed assessor writes the assessment protocol and carries out clearance. We do not offer inspection or testing.

PLAN

Request a service estimate

Share what is happening and receive a clear next step from the local team.

Request estimate
Service overview

What Mold Remediation in Houston Actually Involves

Mold remediation in Houston after water damage means removing mold and mold-contaminated material that grew because something stayed wet. Houston's humidity and the 24-to-48-hour window in which mold can establish on wet drywall make this a natural follow-on to any water job that was not dried quickly. Remediation is the removal, cleaning and treatment of mold; assessment is the inspection and testing that identifies it. In Texas they are legally distinct activities, with separate licenses.

In Texas, mold remediation of 25 contiguous square feet or more requires a TDLR-licensed remediator, and the company that assesses the mold cannot remediate the same job. IICRC S500/S520 are industry standards, not law. That separation is a hard rule, not a best practice: the assessor writes the protocol, the remediator follows it, and the assessor carries out clearance afterwards. A licensed mold job carries a paper trail — an assessment protocol, a work plan, TDLR notification, clearance and a Certificate of Mold Damage Remediation. We do not claim to hold a TDLR mold license or IICRC credentials, and we do not offer mold inspection or testing as a service.

Mold remediation is restoration work, not plumbing, roofing or foundation repair. A plumber repairs the pipe, a roofer repairs the roof, and foundation repair is a separate trade — we restore the water damage and deal with the mold that followed it. We do not diagnose health effects or state a safe mold level, and there is no mold-free guarantee: no such guarantee exists in the Texas rules. If you have health concerns, talk to a medical professional.

  • Dry first, remediate second — Mold that follows water damage is dealt with after the water source is stopped and the structure is drying. Remediation without drying is a repeat job.
  • Containment keeps it in the room — Affected areas are sealed off and negative air is used so dust does not travel to clean rooms while we work.
  • Removal, not cover-up — Porous material with mold growth is removed. Painting over it or covering it up does not remediate it.
  • Assessor and remediator are separate — In Texas, mold remediation of 25 contiguous square feet or more requires a TDLR-licensed remediator, and the company that assesses the mold cannot remediate the same job. IICRC S500/S520 are industry standards, not law.
  • No safe level, no guarantee — There is no safe level of mold in the Texas rules, and we do not promise a mold-free result. We remove what the protocol calls for and verify the structure is dry.
  • A paper trail on licensed jobs — A licensed mold job carries an assessment protocol, a work plan, TDLR notification, clearance by the assessor and a Certificate of Mold Damage Remediation.
Water Damage Restoration inspection and diagnostic work
A careful diagnosis makes every next step clearer.
The service timeline

Our Mold Remediation Process, Step by Step

01

Call and Assessment

You call (346) 980-0009 and tell us where the water was and what you are seeing. Mold assessment is done by a separate licensed assessor, who writes the assessment protocol — we do not offer inspection or testing.

02

Drying the Structure

The water source is stopped and the structure is dried with air movers and dehumidifiers, with moisture readings logged on each visit.

03

Containment and Removal

The affected area is sealed off, negative air is set, and drywall, insulation and other porous material with mold growth is removed.

04

Cleaning and Drying Verification

Exposed framing and hard surfaces are cleaned and sanitized, and moisture readings are taken to confirm the structure is dry.

05

Clearance and Rebuild

Clearance is carried out by the assessor, not by the remediator. Once clearance is done, damaged drywall, insulation and trim are replaced as scoped.

A dehumidifier running in a dry Houston room to prevent mold after water damage.
Tools and methods

Tools and Methods We Use

01

Moisture Meter and Hygrometer

Measures moisture in drywall, wood and concrete and tracks relative humidity, so we know the structure is dry before rebuild.

02

Thermal Imaging Camera

Finds temperature differences that reveal hidden moisture behind walls, under floors and above ceilings — the moisture mold needs to grow.

03

Containment Barriers

Affected areas are sealed off with plastic sheeting and barriers so dust does not migrate to clean rooms.

04

HEPA Air Scrubber and Negative Air

Filters airborne particles and maintains containment pressure during mold remediation.

05

Protective Equipment

Our crew wears protective equipment appropriate to the job, including respirators and gloves, when working in a contained area.

06

Cleaning and Sanitizing Solutions

Exposed framing and hard surfaces are cleaned and sanitized after the affected material is removed.

07

Air Movers

High-velocity air movers evaporate moisture from surfaces so dehumidifiers can remove it from the air.

08

Dehumidifiers

Low-grain refrigerant dehumidifiers pull moisture from the air and keep humidity down while the structure dries.

Where this service helps

When to Call for Mold Remediation

A technician in protective gear inspecting mold on a wall.

A slow roof leak has left mold growing on the drywall in a Heights bedroom, and the stain keeps spreading.

The roof is repaired by a roofer first. A separate licensed assessor writes the protocol, we contain the room, remove the affected drywall and insulation, clean and sanitize the framing, and dry the cavity before any rebuild is scoped.

A Meyerland home flooded, and mold has appeared on the lower walls after the water was extracted.

Floodwater is Category 3, so the porous material it touched was already removed. Where mold has established on what remains, we contain the area, remove the affected material, clean the framing and verify drying — with assessment and clearance by a separate licensed assessor.

A bathroom supply leak soaked the wall behind the vanity, and mold is visible where the baseboard meets the floor.

We stop the water, dry the wall cavity, and contain the bathroom while the affected drywall and baseboard are removed and the framing is cleaned and sanitized. The pipe repair is a plumber's job; we restore the damage.

A slab leak soaked the wall cavity in a Sharpstown home, and mold is growing inside the wall.

Thermal imaging and a moisture meter map the wet cavity. The wall is opened, the affected material is removed under containment, the framing is cleaned, and the cavity is dried and verified before it is closed up.

Local execution

How Mold Remediation Runs in Houston

Houston is a mold-friendly city: high humidity, warm temperatures and a housing stock full of slab-on-grade homes, pier-and-beam bungalows and attic air handlers. A slow leak behind a wall can stay wet for weeks before anyone sees it, and a flooded ground floor can grow mold within 48 hours. That is why our mold work always starts with the water — find it, stop it, dry it — and why the Texas rules matter: assessment and remediation are separate, licensed activities, and the company that assesses the mold cannot remediate the same job.

01

The Heights

Older bungalows, many pier-and-beam, where a slow leak can stay wet under the floor and in crawl spaces before it shows inside.

02

Montrose

Bungalows and townhomes where a leak behind a shared wall can grow mold before either side notices it.

03

Meyerland

Homes near Brays Bayou where floodwater has left mold on lower walls after past floods.

04

Sharpstown

Slab-on-grade ranch homes where a slab leak can wet a wall cavity for weeks before it is found.

05

Gulfton

Apartment buildings where a leak in one unit can grow mold in the walls and ceilings of the units below.

06

Memorial

Larger homes with several HVAC systems, where a condensate overflow can wet ceilings and wall cavities.

07

High year-round humidity

Lets mold establish on wet drywall within 24 to 48 hours, so drying quickly after a leak matters more here than in drier climates.

08

Gulf storms and hurricane season

Drive the floods and roof leaks that create the biggest mold jobs in the city.

09

Slab-on-grade construction

Hides moisture in wall cavities and under flooring, which is why thermal imaging and moisture meters are standard on every assessment.

Before and after

What a successful service visit changes.

Mold After a Roof Leak in the Heights

Before

A slow roof leak left mold growing on the drywall in a Heights bedroom. The stain had been spreading for weeks, and the insulation above it was wet.

After

The roof was repaired by a roofer. A separate licensed assessor wrote the protocol; we contained the room, removed the affected drywall and insulation, cleaned and sanitized the framing, and dried the cavity before rebuild.

Maintenance: We suggested a roof inspection before storm season and an attic check after heavy rain.

Mold After Flooding in Meyerland

Before

A Meyerland home flooded, and mold appeared on the lower walls after the water was extracted. The water had been Category 3, so the porous material it touched was already out.

After

We contained the affected rooms, removed the material with mold growth, cleaned the framing, and verified drying with moisture readings. Assessment and clearance were done by a separate licensed assessor.

Maintenance: We pointed the owner to the HCFCD Flood Education Mapping Tool to check the address.

Mold in a Bathroom Wall in Sharpstown

Before

A bathroom supply leak soaked the wall behind the vanity, and mold was visible where the baseboard meets the floor. The pipe had already been repaired by a plumber.

After

We dried the wall cavity, contained the bathroom, removed the affected drywall and baseboard, and cleaned and sanitized the framing before the wall was rebuilt.

Maintenance: We recommended a leak sensor behind the vanity and under the sink.

Problems we solve

Mold Problems We Solve Across Houston

Most mold calls follow a water loss that stayed wet too long. The location decides the approach. Here is how we handle the most common ones.

01

Mold on drywall after a leak

Drywall with mold growth is removed under containment, not painted over. The framing is cleaned and sanitized, and the cavity is dried and verified before rebuild.

02

Mold after flooding

Floodwater is Category 3, so porous material it touched is already removed. Mold on what remains is remediated under containment, with assessment and clearance by a separate licensed assessor.

03

Mold inside a wall cavity

Thermal imaging and a moisture meter map the wet cavity. The wall is opened, the affected material is removed, the framing is cleaned, and the cavity is dried before it is closed up.

04

A musty smell after water damage

A musty smell after a leak is a symptom, not a diagnosis. We map the moisture with a meter and thermal imaging to find where water is still sitting — assessment of the mold itself is done by a separate licensed assessor.

Proof behind the promise

What You Can Check Before You Call

4.7 out of 5Google rating from 152 reviews
Open 24 hoursEvery day, Monday to Sunday, including holidays
Veteran-ownedA veteran-owned Houston business
Wheelchair accessibleAccessible entrance, parking lot and restroom
Based in Gulfton5250 Gulfton St Suite 3A, Houston, TX 77081
Written scope firstClear written options before work starts — no work begins without your agreement
Documented dryingMoisture readings logged on every visit, shared with you and your adjuster
Houston neighborhoodsServing the Inner Loop, Memorial, Sharpstown, Meyerland, Kingwood and Clear Lake
A dehumidifier running in a dry Houston room to prevent mold after water damage.
Technical expertise

Crews Trained for Houston Water Damage

Our mold work follows the process described in ANSI/IICRC S520, the industry standard for professional mold remediation — an industry standard, not law. The Texas rules come first: mold remediation of 25 contiguous square feet or more requires a TDLR-licensed remediator, and the company that assesses the mold cannot remediate the same job. We work to the assessor's protocol, contain the area, remove what the protocol calls for, and verify the structure is dry.

  • Work to the licensed assessor's protocol, never to a guess
  • Containment and negative air so dust does not travel to clean rooms
  • Porous material with mold growth removed, not painted over
  • Antimicrobial treatment on framing where the protocol calls for it
  • Verification that the structure is dry before the job is closed
A technician in protective gear inspecting mold on a wall.
Customer stories

What Houston Customers Say

Chloe CraneHomeowner — a year ago

Dealing with water damage is stressful, but Restoration Enterprise made the whole situation manageable. They were calm, knowledgeable, and reassuring from start to finish. I could finally breathe knowing my home was in good hands.

Moshe sayagHomeowner — a year ago

Exceptional Service Beyond Expectations! I am delighted to write this review for the highly professional and efficient water restoration company that turned our disaster into a blessing. When we discovered a serious plumbing issue in our kitchen, we were overwhelmed with anxiety and worry. However, the moment we reached out to them, they swiftly stepped in, assuaging our fears and promptly handling the situation. The thing that struck me the most about this company was their extraordinary customer service. They were not just professional, but also empathetic, understanding the stress we were under. They were quick to respond, arriving at our home within an hour of our call, fully equipped to deal with the situation. The cleanup process was swift and unobtrusive, causing minimal disruption to our daily routine. They even liaised with our insurance company, alleviating us from the added stress of handling paperwork. It's not often that you encounter a company so dedicated to their work and to the satisfaction of their clients. They turned an unfortunate event into a surprisingly positive experience. We are beyond pleased with the results and are grateful to have our kitchen back, in even better shape than before! If you are ever unfortunate enough to encounter a water disaster in your home, I wholeheartedly recommend this water restoration company. Their professionalism, efficiency, and dedication to customer satisfaction are second to none.

4.7 stars from 152 Google reviewsGoogle aggregate rating

Rated 4.7 out of 5 from 152 Google reviews — 142 five-star reviews. The two reviews on this page are quoted verbatim from Google; the full set can be read on our Google profile.

What are the Texas rules for mold remediation?

In Texas, mold remediation of 25 contiguous square feet or more requires a TDLR-licensed remediator, and the company that assesses the mold cannot remediate the same job. IICRC S500/S520 are industry standards, not law. Mold assessment — inspection and testing — is a separate licensed activity, done by a separate licensed assessor.

Do you offer mold inspection or testing?

No. Mold inspection and testing — mold assessment — is a separate licensed activity in Texas. Assessment is done by a separate licensed assessor, who writes the assessment protocol and carries out clearance. We do not offer inspection or testing as a service.

Can mold grow after a small leak?

Yes. Mold can establish on wet drywall and wood within 24 to 48 hours in Houston's humid climate, and a slow leak behind a wall can stay wet for weeks before anyone sees it. That is why finding the moisture and drying the structure quickly matters — and why a leak that has been wet for a while needs assessment, not just a fan.

Is black mold dangerous?

We do not diagnose health effects or state a safe mold level, and there is no mold-free guarantee in the Texas rules. Black mold is a color description, not a diagnosis of a specific mold or a health outcome. If you have health concerns, talk to a medical professional.

How long does mold remediation take?

It depends on the area affected, the materials involved, how much has to be removed, and how long drying takes. Assessment, containment, removal, cleaning and clearance each take their own time. We give you a written scope after the assessment, not a promised number of days.

Frequently asked questions

Frequently Asked Questions About Mold Remediation

Not seeing your question? Our local team can help you understand urgency, scheduling and what to expect.

Ask the local team
A dehumidifier running in a dry Houston room to prevent mold after water damage.
Here when the problem will not wait

Need Mold Remediation in Houston Right Now?

Mold follows water — and the longer it stays wet, the bigger the job. Call (346) 980-0009 and we will give you a straight answer on what needs to happen next.

Contact the local team

Call our Houston mold remediation team

We answer the phone around the clock, including weekends and holidays. Tell us where the water was and what you are seeing, and we will give you a clear next step. Phone is our contact channel — call (346) 980-0009.

Request received. We will be in touch shortly.

Call now